How to Install a Ghost Immobiliser
Ghost immobilisers are an effective deterrent for car thieves. By combining this device with other security systems and remaining vigilant, you can put together a robust defense against modern, tech-savvy thieves.
Ghost immobilisers will shield your vehicle from hotwiring and relay car thefts by requiring you to enter a pin code in order to start the vehicle. It is activated by buttons on your steering wheel or centre console, making it invisible to thieves.
Identifying the Wires
It is important to protect your car as more and more vehicles are being taken without the owners' key. A ghost immobiliser is an excellent method to add an extra layer of security to your vehicle. It blocks all signals coming from your key fob, making it's impossible to start the vehicle without entering a PIN.
You can install the ghost immobiliser yourself, but it is better to let a professional do the work. A professional technician will know the best place to install the device and how to connect it to the wiring of your vehicle. Installation can be complex, and it's important that all connections are made correctly to avoid malfunctions or damage.
To get the most effective results, it is recommended to work in a well-lit location and wear the appropriate safety equipment. It is also recommended to read the user manual and familiarise yourself with the wiring system. This will help you identify the wires that are required to install the wiring, and ensure you have the proper equipment and components.
Once the wiring is connected, you can reconnect the battery and check the system to see whether it's working properly. You should also make sure that the battery terminals are secure to prevent electrical issues. It is also important to label the CAN L and H wires with labels or tape to be capable of keeping track of them throughout the installation process.
If you wish to permit another person to drive your vehicle temporarily for valet parking or when your vehicle is in for service, the Ghost Immobiliser can be put into Transport Mode. This allows you to input the code via the service button on the steering wheel, centre console, or door panels, and then it will enter the PIN mode for changing the code.
Some thieves try to circumvent a ghost immobiliser by employing spoofing or jamming devices to block or send fake signals to the system. This can be prevented by investing in anti-jamming technology and monitoring your Ghost immobiliser to detect signs that it's been tampered with.
Disconnecting the Battery
The ghost immobiliser is a cutting-edge security device designed to prevent car theft. It uses innovative technology to detect the engine and then deactivate it when the correct PIN is entered. This stops the vehicle from being taken by thieves. The system is highly effective and stealthy. It doesn't have any visible indicators to deter criminals. However, there may come an occasion when you have to take the unit off to perform maintenance or upgrades, or even to sell your car.
This procedure requires special tools and knowledge, as you will be working with wires and removing certain factory components. It is also essential to follow the step-by- instruction given by the manufacturer. It is recommended to consult an experienced mechanic or auto electrician, particularly if you're not familiar with working on cars.
After identifying the wires and disconnecting them after that, you must check the condition of your battery. Ensure that it is clean and free of any corrosion, and that the connections are secure. Consider replacing the battery if required to ensure that it is strong enough for the electrical demands of a security system aftermarket.
After you have disconnected the wires from the battery, you are now able to begin to remove the ghost immobiliser. Strippers or wire cutters can be used to disconnect the wires. Be careful not to damage the wires or their terminals. Make sure you label each wire so that you can reconnect them properly in the future. If the wires have been soldered, use a tool that is heat-resistant to break the connection. To avoid short-circuits, it is crucial to wrap the wires with insulation tape or heat shrink tubing.
Connect the wires back to the 12V constant power source. If necessary, use an electrical fuse to ensure that the connections are protected by a fuse. Then connect the grounding wire to a grounded point on the vehicle's chassis.
After you have connected the wires, turn on your vehicle and enter the PIN code. Then, try starting the engine once more. If the engine fails to start then you have successfully removed the ghost immobiliser.
Making Connections
Ghost immobilisers are an affordable method to increase the safety and security of your vehicle. It connects to the CAN bus system in your car, capturing signals, and stopping the vehicle from starting until the right PIN code is entered. This device is virtually impossible to circumvent. It's a great choice for those who want peace of mind and security. In combination with a Thatcham Approved tracking system, it could also help reduce your insurance costs.
Reviewing and obtaining the wiring diagram for the vehicle model you are considering is essential in the installation process. The diagram will act as a reference guide for locating the necessary wires to make precise connections. Utilizing the right connections or soldering techniques will ensure that the connection is strong and secure.
The wires that connect the Ghost immobiliser to the CAN bus system need to be properly identified and connected. Use small labels or tape to label the CAN L and CAN H wires. This will prevent confusion during installation. The location of these wires will differ in every vehicle, so it is crucial to check the wiring diagram for your vehicle as well as online resources for identifying them.
After the correct wires have been connected after which the power to the Ghost immobiliser can be restored. It is recommended to test the immobiliser by launching the engine and not entering the PIN code. This will ensure that the immobiliser has been installed correctly and working as intended. It is recommended to check your immobiliser on a regular basis, as this will assist in identifying any issues or problems early.
Another benefit of the ghost immobiliser is that it can be put in place in a matter of minutes and does not require any cutting or modification to your vehicle's internal wiring. It is a fantastic option for those who want to enhance the security of their vehicle because it works with an Thatcham approved alarm or tracker to send you a notification on your phone or tablet if the vehicle is compromised.
Mounting the Unit
The Ghost immobiliser is an excellent protection against car thieves, especially when paired with the GPS tracking system. It uses buttons on the centre console, doors, and steering wheel to create a unique sequence you can only recognise. This stops your car from starting. The device is also tamperproof and weatherproof. It also comes with a three-year guarantee and is recommended by a variety of insurance companies.
When installing the system it is important to follow the instructions carefully. While some people can handle the work by themselves, it's recommended to consult a professional if you are unsure. A multimeter and wire stripper are essential tools for identifying the wires and making precise connections. It's also an excellent idea to buy some electrical tape and insulation for safeguarding the connections from damage. It's a great idea to test your device once the installation is complete to make sure that everything works as it should.
A Ghost immobiliser is a fantastic option to safeguard your vehicle against theft, particularly in high-crime areas. It wards off key cloning ECU swapping and other security risks, and can be paired with an iPhone application to make it easy to manage and monitoring. It's a favorite choice for those who own vehicles who want to safeguard their investment. It's easy to install.
autowatch ghost immobiliser is designed with a slim, low-profile design that makes it virtually unnoticeable by thieves. It connects to your vehicle's CAN (Controller Area Network) and stops you from starting the engine without entering a PIN code. The PIN code is generated by an unique sequence of buttons on the steering wheel or centre console, or on the doors. It can be changed at anytime. The device is also tamper-proof and comes with an GPS tracker that can assist police find your car in the event of theft. It's a great option to safeguard your vehicle from thieves and is Thatcham certified.